Continuous Panel Production:

Caterpillar Press

Features:

• The lamination machine is designed as standard to process slab stock from Mineral wool, EPS, XPS PIR and PUR core materials.
• Caterpillar press to provide even lamination pressure throughout adhesive curing.
• Manual core loading.
• Operator loads slabs onto in feed pusher table.
• 5 Tonne coil holders.
• Coil bore 500 to 510 mm and 600 to 610 mm.
• Tungsten tipped side trimmers for interlocking panel joint.
• Standard Interlocking panel joint system for 1200 module panel.
• Auto Assisted start.
• Standard face panel surface groove.
• Easy clean head adhesive application system.
• Adhesive pre-heat and post heaters. Machine lights Machine guarding MMI Operator computer control panel.
• 3 Bag Dust Extraction unit for lamination line unit only
• Automatic flying Band saw for square cut panels.
• 2 off 5 Metre Run-out tables for wall panel.

Options:

• 8 Tonne coil holders bore 500 to 519 mm or 600 to 610 mm
• Coil bore.
• Deep Profile Rollformer for Profiled roof system.
• Crown insertion unit.
• Insulated enclosure for press section.
• Insulated enclosure for band saw.
• Caterpillar press modified to incorporate lower profiled sheet for DPR panel production.
• End of panel rebate cutter for end of panel step cuts.
• Automatic Cold wire saw for cutting step cuts in panel core.
• 2 Off Run out tables for the profiled roof panel.
• Panel Unloading Vacuum stacker.
• Panel inverter for DPR Panel.
• Finished Panel stretch wrapping system including continuous panel stretch wrapper and conveyors.
• Mineral Wool lamella saw.

For further details please use our enquiry form to contact us.